DX Engineering THUNDERBOLT DXE-MBVA-1UP, Руководство пользователя

Страница: 30 / 32

- 29 -
DXE-RADW-20RT/-32RT/-65RT Pre-Assembled, Radial Wire, w/ 1/4" ring Terminals, 20 Pack
The DXE-RADW Radial Wire Kits include the highest quality 14 gauge stranded copper wire with relaxed black PVC insulation for
easy installation of your radial system. They allow fast and easy installation of your radial ground system, and permit you to mix and
match different length to fit the available space. The stranded wire and relaxed insulation mean that the wire will lay flat as you place
it on the ground - easy to install! The twenty pre-cut radial wires include 1/4" ring terminals professionally crimped on one end for
quick and easy attachment to the radial plate. These Radial Wire Kits are designed for users of vertical antenna systems which have
the need for a high quality radial system for optimum antenna performance. The 1/4" ring terminals are machine crimped for
maximum grip. Soldering is not required for strength, but is recommended if installed in corrosive environments such as salt spray.

Packed 20 Radial Wires per package

14 gage, stranded copper wire

Black relaxed PVC insulation

1/4" Ring Terminal professionally crimped on each Radial Wire

3 lengths to choose from: 20 Ft (-20RT), 32 Ft (-32RT), 65 Ft (-65RT)
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your
radials during lawn maintenance.

100 count - 6'' Pins

11-Gauge
DXE-STPL-100P
Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P Radial Wire Anchor Pins, 300/pack
DXE-STPL-100BD - Radial Wire Staple, Biodegradable, 3", 100 pack
DX Engineering DXE-STPL-100BD is a 100-pack of 3” biodegradable anchors that are produced from recycled PLA
(Polylactide Resin). Depending on the weather conditions, they will degrade in about a year. They are easily installed and
will hold radial wires in place until lawn roots overtake them - and then disappear. Ecologically friendly!
DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole/20-pk
This is a set of 20 ring terminals for AWG #14 to 16 wire with a clearance hole for a 1/4" bolt. These are the same crimp
terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.
DXE-RADP-1HWK - Radial Plate Wire Attachment Hardware Kit - Stainless Steel
20 Sets of ALL Stainless Steel Radial Hardware for use with the DX Engineering Stainless Steel Radial Plate.

(20) 1/4'' Bolts - (20) 1/4'' Nuts - (20) 1/4'' Flat Washers - (20) 1/4'' Split Washers - (20) 1/4'' Star Washers
SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10 gauge. Just insert the wire, squeeze
the handle, and listen for the click. That’s the sound of another perfect wire stripping job performed in about 2 seconds-
a fraction of the time it takes your pocket knife to do the same job. An adjustable wire length guide helps you make
uniform strips, and a built-in wire cutter and crimper helps you complete your wiring job.

Spring-loaded design

Strips wires ranging from 24 to 10 gauge

built-in wire cutter and crimper
DXE-RADW-20RT Package of 20 each 20 Ft Radials with 1/4" Ring Terminals
DXE-RADW-32RT
Package of 20 each 32 Ft Radials with 1/4" Ring Terminals
DXE-RADW-65RT
Package of 20 each 65 Ft Radials with 1/4" Ring Terminals