- 9 -
NOTE:
The parts list (above) and drawing only show the parts for the 3-piece antenna and antenna
mounting plate. Other parts in this kit include the AVA-3 unit, mounting hardware, two ground rod
mast mounting clamps and one ground clamp with tab which are described in the following
assembly.
Bottom Antenna Element Assembly
Refer to the drawing shown in
Figure 3
and
Figure 4
for the antenna assembly.
Figure 4
Figure 4
Install 2 hex head bolts (#10-24 x 1-1/2” long) in the mounting plate using flat washers and hex nuts
as shown in
Figure 5
, tighten in place.
Figure 5
