DVTEL TRK-101-P, Руководство по установке

Страница: 18 / 36

trk-101-P Installation Manual
6
To assemble units in a rack mount panel:
1. Remove the nut and washer from each of the two video connectors on the video connection
panel of the unit.
Figure 5: trk-101-P with Nuts Removed
2. Attach each unit to the rear side of the rack mount panel by inserting it through the holes as
shown in Figure 6 .
Figure 6: Inserting Units into Rack Mount Panel
3. Fasten each unit using the nuts and washers removed in step 1 , making sure to first place the
washer on each video connector before tightening the nut on the video connector.
4. Repeat steps 1 through 3 for each of the units you want to assemble on the rack mount panel
(up to 10 units can be assembled per panel).
5. Attach the rack mount panel to a 19" rack.