DVS Cine4K, Руководство по оборудованию

Страница: 32 / 74

2-14
Cine4K Hardware Guide
Figure 2-15: Audio I/O panel
Video I/O Panel
The video I/O panel of the DVS system holds two video interfaces
(DMS-59 connectors) for an output of analog and digital video signals.
They can be connected to breakout cables that will then provide each
two standard DVI connectors. The breakout cables are included in the
delivery of the Cine4K. Pin-outs of the DMS-59 and DVI connectors
can be found in section section “Signal In- and Outputs” on page A-9.
Item Explanation
Analog Audio 3.5 mm unbalanced stereo headphone jack
to monitor the audio output
Digital Audio (AES/
EBU) DB-25 connector (female) for audio signal
and LTC in- and output; provides either four
stereo channels digital audio (channels 1
to 8) or three stereo channels audio plus LTC;
ex factory the fourth stereo channel is acti-
vated; XLR connectors are available via a
breakout cable
Whether a fourth stereo channel or
LTC is provided by this connector
can be configured via jumper set-
tings (see section “Configuring Au-
dio/LTC” on page A-6).
AES/EBU
Analog Audio
Digital Audio (AES/EBU)