DVS Atomix LT, Руководство по установке

Страница: 20 / 72

2-2
Atomix LT Installation Guide
2.1 Overview of the Video Board Product
Atomix LT as a video board product consists of various individual com-
ponents that combined will give you the opportunity to develop your
own real-time video and film solutions. The diagram below shows the
different components included in the delivery of Atomix LT:
Figure 2-1: Atomix LT overview
The components of Atomix LT can be divided into hardware and soft-
ware components:
To the hardware components belong the items described in this instal-
lation guide. Atomix LT is centered around the Atomix LT board, a 2/3-
length PCIe bus single board for the real-time input and output of un-
compressed video and audio signals. All major video and film formats
are supported from SD video up to 2K film via SDI I/O, supplemented
by up to 16 channels audio either over AES/EBU or embedded in the
video stream. To use all the features of Atomix LT several slot panels
may have been included in your delivery as well as other accessories
such as breakout cables. All these items and their installation will be de-
scribed in this manual.
Among the software components you can find the DVS software de-
velopment kit (DVS SDK) which can be used to build editing and stor-
age solutions with Atomix LT. The DVS SDK is compatible among the
video board products by DVS meaning your code can be used with oth-
er DVS video boards as well. Several tools for hardware setup and di-
agnostics complement the SDK. To run properly the video board driver
has to be loaded prior to using Atomix LT which can be done with the
tools for the hardware setup. The video board driver controls the
Atomix LT board and thus the in- and output of signals. The DVS SDK
as well as all other software components are described in the separate
SDK documentation.