Operator’s Manual – Spider CROSS LINER
26
5.9 HYDRAULIC STABILIZING WINCH*
The mower is equipped with an integrated stabilizing hydraulic winch (hereinafter referred to as "winch"), which is
designed as a stabilizing device and improves the mower stability on slope. It also prevents the mower from sliding
downhill and reduces soil erosion.
There must not be any obstacles that could jam or damage the rope
– such as trees, bushes, etc. – in the operating
area between rope and mower.
IT IS FORBIDDEN TO USE THE WINCH
•
If any parts of this equipment are
damaged or
show considerable wear,
e.g.: rope, carabiner,
etc.
•
For purposes other than stabilizing
the
SPIDER XLINER.
•
For removing objects
, securing people or
objects on a slope.
•
On slopes
where there are terrain obstacles
and
there is a possibility of damaging the rope or getting
caught on a slope.
•
In places where the
anchoring point is not strong
enough and can be loosened after anchoring and
working with the mower.
SAFETY INSTRUCTIONS
•
Always keep the winch and its accessories clean
and in good condition. After finishing work, clean
it by sweeping and wiping. Do not use gasoline
or similar petroleum products for cleaning.
•
Do not pull / anchor the winch rope over roads,
sidewalks, and people's spaces.
•
When working with the winch, select the working
position so that you do not move under or
directly above the machine and do not cross the
rope path. There is a risk of injury when the
machine slips or the operator may slip and fall
under the mower.
•
Use the winch only for stabilization with the
engine speed set to maximum.
•
Do not reach into the winding drum with any part
of your body in order to straighten the rope. The
rope is wound up along its current position on
the winding drum.
•
The carabiner must not strike or be subjected to
additional external forces (pull only).
•
Follow the procedure for attaching the winch
rope to an anchoring point.
•
The carabiner must always be properly closed
(locked) with a locking segment - the carabine
can only work safely with the lock properly
tightened.
•
Check the mowing area carefully. Orient
yourself, assess the situation and test the
possibilities of the terrain. Do not take chances.
It is necessary to inspect the terrain thoroughly
before starting work.
•
Work on a slope from the bottom towards the
top. You will work, generally, from a lower to a
higher incline, which will give you a better
chance to evaluate the climbing ability and make
the right decisions concerning further work. Be
aware of the dynamic effects of the mower while
mowing, which can cause considerable strain on
the winch rope and anchoring points.
•
If the mower slips, do not try to stop it and do not
approach the mower, especially in the area
under or above the mower.
•
Always stand aside while operating, never
directly above or below the mower.
•
Before working on a slope, ensure that no one is
moving beneath the mower or in the general
mowing area. Do not endanger third parties or
property with the machine.
•
Choose your operator's position outside the area
where the mower can slide / fall or the mowed
grass is ejected. The direction of the ejected
grass may change with respect to the direction
of travel during machine operation.
WHILE WORKING WITH THE MOWER YOU SHOULD AVOID
•
sudden sharp steering or braking
•
driving too fast
•
unstable soil and driving on uneven surfaces
•
changing wheel adhesion (driving from areas
exposed to sun to shade etc.)
•
driving on the grass that has already been cut
*not included in lite version
Содержание SPIDER CROSS LINER
Страница 2: ...Operator s Manual Spider CROSS LINER Notes...
