34
Image Quality:
Set the image quality, image quality can be changed only when rate
control is variable bit rate,(main stream defaulted is better, secondary stream default
is not good, there are best, better, good, bad, worse, worst for options).
Rate (Kb / s):
Set the video bit rate (main stream default 4096Kb / s,64-12288Kb / s
optional; secondary stream default 1024Kb / s,64-10240Kb / s optional).
Frame rate (F / S):
Set the video frame rate (primary / secondary stream default 25F
/ S, primary stream 5-60F/S optional, secondary stream 5-30F / S optional ).
Key frame interval:
Set the Button frame interval (primary / secondary stream
default 75F,primary / stream 1-300F optional. secondary stream 1-150F optional).
Minimum QP of key frame interval:
Set minimum QP of Button frame
interval(Default 20, 10-51 optional)
Stream Name:
When streaming via rtsp or rtmp, user can modify stream name. Main
Stream(live/av0), sub stream(live/av1)
Click the "Save" button to display the "Parameter saved successfully" message, then
settings take effect.
2) Stream Release
Switch:
To turn on/off the main / secondary stream.
Protocol:
primary / secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935,0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0,live / av1 optional).
User:
Set the user name.
Password:
Set the password.
Click on the "Save" button to display the "Save successful" message,then settings
take effect.
3
）
RTP Broadcasting
Main/Sub Stream
：
On/off
；
Protocol
：
RTP or TS
Address
：
Default 224.1.2.3. It can be edited.
Port
：
The main stream defaults to 4000, the secondary stream defaults to 4002, and
the main/secondary stream is optional from 0 to 65535.
Visit
：
Address comes up after setting. Eg; rtp://224.1.2.3:4000
；
udp://@224.1.2.3:4000
；
tcp://@224.1.2.3:4002
；
