Battery Voltage Recorder BVR11
M-B011VR-202-EN
5
2. Description
2.1.
Front Panel Components
1. Operator Control
3,1„‟ color display
Displays the settings during the device test mode selection as well as the measured values during
and after a test operation.
2. Keyboard
Used to control the device.
• Use the button
to turn on/off the device.
• Use the
START
button to start the test.
• Use the
STOP
button to stop a test.
• Use the
ENTER
button to confirm the defined test parameters, language, time and date, limits as
well as to go to the next screen if no changes needed on the active one. ENTER button is also
used for navigating to the
Voltmeter mode
or
Current probe mode
of measurement in
Main
Menu
.
• Use the
LEFT/RIGHT
buttons to navigate through the active menu.
• Use the
UP
/
DOWN
buttons to set the test parameters and to navigate through the Measurement
(MEM) and
Settings
(SET)
Menu
.
• Use the
MEM
button to go to the
Memory Menu
.
• Use the
SET
button to go to the
Settings Menu
(language, time & date, limits, default setup).
3. Voltage terminals
Voltage sense cable terminal
The terminal for connecting voltage sense cables or current clams used for float current
measurements.
2
3
4
5
6
Figure 2-1:
BVR11 Front Panel
1
