10.
Place the Left Side in position.
Cement the channels in the left side as shown in figure #C-3.
Fig.C-3
Left
Side
Fig.C-4
Inner
Bottom
Stand the left side in position, and brace it so it will stay upright as you install the next parts.
11.
Install the Inner Back.
Cement the channel in the inner bottom as shown in figure #C-4 above.
Put the inner back in its channel in the bottom, and slide it to the left so it’s left edge is seated
in the matching channel in the left side.
Cement the channel in the inner bottom and slide the inner back into position
12.
Install the Inner Top.
Cement the channel at the rear of the underside of the inner top as shown in figure C-1 (see
step 7). Place the rear of the inner top on the top of the inner back, and slide it to the left so
the left edge of the inner top is seated in the groove in the left side.
