Dutch originals K8.2D, Руководство пользователя

Страница: 8 / 33

your goal in view. With continuous training you will be able to see how you
are progressing day by day and are gradually approaching your personal
training goal.
220
115
110
205
200
195
190
185
180
175
170
165
160
155
150
145
140
135
130
125
120
115
110
105
100
20 25 30 35 40 45 50 55 60 65 70
195 195
175 175
165 165
136 136
133 133
129 129
126 126
122 122
119 119
115 115
112 112
108 108
105 105
161 161
157 157
153 153
171 171
166 166
162 162
157 157
153 153
148 148 148 148
144 144 144 144
139 139
140 140
135 135
136 136
131 131
127 127
190 190
185 185
180 180
175 175
170 170
165 165
160 160
155 155
150 150
Symbol Description
Maximum pulse rate (220 - age)
90% of the maximum pulse rate
85% of the maximum pulse rate
70% of the maximum pulse rate
Calculation formula
Maximum pulse rate
220 - age
90% of the maximum pulse rate (220 - age) x 0.9
85% of the maximum pulse rate (220 - age) x 0.85
70% of the maximum pulse rate (220 - age) x 0.7
Example: 90% of the maximum pulse rate (age 30): (220 - 30) x 0.9 = 171
MOVING THE DEVICE
There are two rollers on the front foot. If you want to move the device, you
can lift the rear foot and drive it to where you would like to place or store
the device.
CARE AND MAINTENANCE
• Clean the device with a soft, absorbent cloth after each use.
• Do not use solvents to clean the device.
• Regularly check that all screws and nuts are tight.
• If necessary, lubricate the joints.
• Remove the batteries from the computer if the device is not used for a
long time.
• Store the device in a clean and dry environment.
• Store the device out of reach of children.
TROUBLESHOOTING
Issue Possible cause Solution
No sensor on
the computer
The sensor line is
damaged or not
properly connected
Connect the sensor
line correctly or place a
new sensor line in the
event of damage.
No display on
the computer
No battery power or the
polarity of the batteries
is not correct
Make sure battery
polarity is in the
right position or
change batteries.
Loose pedal Not tightened properly
Tighten the pedals
properly using
the wrench.
Belt slip
The adjustment screw
is not tight enough
Adjust the tightness of
the belt and tighten the
nut using a wrench.
Unstable product
End cap is not in
correct position
Adjust the end cover or
place the device on a
flat surface.
Noise
Moving parts are loose
or no lubricant oil
Tighten loose parts or
add lubricant oil.
Light resistance,
no resistance or
level increase
The line of controller is
too loose or too tight
Adjust the connection
for the controller line,
loosen the line of the
controller if it is too
tight; tighten the line
of the controller if it is
too loose.
Incorrect
handrail angle
Incorrect assembly
Check the handrail
and make sure it is
assembled according
to the manual.
INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT
(WEEE, the waste electrical and electronic equipment directive)
Your product has been manufactured using high quality materials and
components which can be recycled and used again. At the end of its life,
this product cannot be disposed of in normal domestic waste, but must be
taken to a special collection point for recycling electrical and electronic
equipment. This is indicated in the user manual and in the packaging by
the waste container marked with a cross symbol. Used raw materials are
suitable for recycling.
By recycling used appliances or raw materials, you are playing an
important role in protecting our environment. You can ask your local
council about the location of your nearest collection point.
Do not dispose of batteries in your household waste. Dispose of batteries
by taking them to your local recycling station. Contact your local
government offices for details.