7
Customer Service Helpline 1.800.568.3949 dustlesstools.com
USAGE
CLEAN FILTERS (REGULAR WET+DRY)
1. Always turn off the vacuum before cleaning
the filters.
2. Keep the lid closed on the barrel, do not
remove the lid.
3. Remove the black agitator rod cover from
the lid.
4. Lift the agitator rod slightly and rapidly
shake it from side to side five times so the
basket hits the sides of the outer filter to
knock off the layer of dust. Note: Pushing
down may push the filter off.
5. Replace the black agitator rod cover to the
top of the lid.
DRY PICKUP
1. Barrel should be emptied of any wet waste.
Filters can remain in place.
2. Connect hose and desired attachment.
3. As suction is reduced stop to clean or
replace filters. (Refer to Clean Filters or Filter
Installation)
4. After use or when barrel is full turn off
vacuum and disconnect from outlet.
5. Remove intermediate from barrel.
6. Empty barrel and/or remove WunderBag.
Note: To avoid back strain, do not lift a full
barrel/bag.
CLEAN FILTERS (HEPA WET+DRY)
1. Turn the vacuum off and wait 5 seconds
after motor comes to a stop. Repeat 5
times. This allows weight to expand filter
cover and release dust.
2. For increased effectiveness, move the
vacuum vigorously side to side and back
and forth while shut down. Plugging and
unplugging the hose while running may also
restore some suction.
3. THOROUGH FILTER COVER CLEANING
Hand or machine wash the filter cover. Let it
line dry. DO NOT PUT IN THE DRYER.
4. Filter covers may also be vacuumed off to
restore suction.
5. HEPA filter should be discarded, DO
NOT attempt to clean HEPA filter. Proper
installation and use of the Wunderbag
and filter cover will maximize the life of the
HEPA filter.
