6
Customer Service Helpline 1.800.568.3949 dustlesstools.com
SETUP
1. Remove entire contents of box.
2. Slide legs into slots with the legs with the
hooks in the back. Screw in screws.
3. Attach tool tray.
4. Place intermediate on barrel. Use clips to
secure in place.
5. Slide one end of the hose into the port.
Slide desired attachments on to the other
end of the hose.
WUNDERBAG INSTALLATION
1. Place the cardboard collar with the rubber
gasket securely over the intake port on the
inside of the barrel.
2. Reach inside the port and with your fingers
press cardboard tight and secure around
port.
WET PICKUP
1. Vacuum should be emptied of any dry
waste. Filters can remain in place. Note:
Should filters become wet, dry both filters
thoroughly before continued use.
2. Connect hose and desired attachment.
3. After use or when barrel is full turn off
vacuum and disconnect from outlet.
Note: When barrel is full the automatic shut-
off mechanism will shut off vacuum pickup.
When this happens, the motor will become
noticeably higher pitch.
4. Empty barrel by unscrewing drain cap. Drain
is regulated so liquid can go from a drip to a
full flow. Note: Hose can be put in the drain
cap to drain up to 12 feet away.
