Durr Dental Touchless T 1000, Инструкция по установке и эксплуатации

Страница: 5 / 16

17
5. Technical description, 6. Mounting of the dispenser
5. Technical description
The appliance recognizes by means of a touchless sensor technique and a hand ap-
proaching the outlet and, thus, automatically releases a pump stroke.
The appliance meters free-flowing media by means of a removalbe suction pump from an
exchangeable receptacle which is inserted into the dispenser.
6. Mounting of the dispenser
6.1 Preparation of the installation
One has to take care by means of adequate equipment that no medium pours out on
the floor.
• Prior to use of new filling media, tests are required!
• Please pay attention to that during innstallation, no
radiation-emittent object (i. e. X-ray apparatus,
mobile telephone, ultrasound device, direct
illumination over the dispenser, etc.,...)
is in the near proximity.
Electromagnetic interference sources and/or
radiating electric fields may impair the function!
Prior to the mounting of the dispenser
please observe the following
•
Required place above the dispenser:
40 mm (for putting on and removing from the
mounting plate).
Please take the required place below the
dispenser from the dimensioned sketch.
• Suitalbe mounting height:
130–135 cm, measured from the floor up
to the upper edge of the dispenser.
130 - 135 cm
EN