Durr Dental Touchless T 1000, Инструкция по установке и эксплуатации

Страница: 7 / 16

19
7. Going into operation
Open faceshield. Open battery cover by releas-
ing the lower strap an the front
side underneath the base
angle. Open the batt. cover.
7. Going into operation
7.1 Insert the batteries
The back of the dispesner must therefor be accessible (mounting plate removed).
Insert the batteries in the
dispenser.
Pay attention
to correct polarity and
sequencs as above!
1
2 4
3
5
• If the dispesner is not used for a longer period than 3 months, batteries should be
removed in order to prevent unwanted discharge.
Unhinge the cover and put it
beside.
• After correct insertion of the batteries an acoustic signal sounds.
• Slide the dispenser from the above onto the mounting plate.
• Close the faceshield: now the dispenser starts with the first gauging.
• The noise level of the unit is below 70 dB (A).
• If the batteries have not been inserted with closed face shield, the measuring procedure has to
be carried out once again after having put the dispenser on the mounting plate by shortly
opening and closing the faceshield such as with the change of the pump.
This procedure is explained below in more detail.
7.2 Use of the appliance
• Prevent unwanted pump strokes by opening the face shield and keeping it open during
exchange. Body parts as well as objects have to be removed immediately for about
10 seconds after having closed the faceshield because dispenser adjusts itself.
The LED lights while the dispenser gauges. As soon as the light is out the dispenser is
ready for operation.
After change of receptacle or pump, the medium has to be primed with several pump
strokes (repeated pumping operation necessary).
•
With the correct opening and closing of the faceshield, a (different) acoustic signal
sounds.
• After sliding dispenser onto mounting plate, insert pump and close the faceshield.
The dispenser will adjust to the pump stroke size and the environment.
•
Insert a receptacle filled with medium of your choice into the dispenser.
• Make sure that receptacle is in correct safe position and cannot fall out the dis
penser.
• Now you can use the appliance.
EN