Duronic BL3, Руководство пользователя

Страница: 5 / 23

8 9
A) Container slot
B) Power base
C) Container (capacity: 600 ml)
D) Container lid
E) Blade set
F) Small Container and small lid (sold separately)
This appliance has been designed for domestic use only and must not be
used for commercial/industrial purposes. This appliance complies with the
Directive 2006/95/ EC and EMC 2004/108/EC, and to the (EC) regulation No.
1935/2004 dated 27/10/2004 for materials in contact with food.
IMPORTANT NOTE
Before using the appliance, we recommend washing all removable parts that
will come into contact with food. Use hot water, a cloth and a mild detergent.
Dry thoroughly.
- Place the Container (C or F) on a flat, horizontal surface with the opening
facing upwards and pour in the ingredients you wish to use, cutting them
into small pieces if necessary, without exceeding the maximum level mark
indicated on the Container itself.
- Place the blade set (E) on the opening of the container (C or F) and turn it
clockwise until it locks into place (Fig. 2).
Description Of Parts
Operation Instructions
- Turn the Container (C or F) upside down and place it in the slot (A) of the
power base (B) by inserting the nicks on the blade unit (E) into the power base
slots (Fig. 3).
- Plug the appliance into the wall socket and press down gently on the top of
the container (C or F) to start the blender, which will continue to operate if it is
pressed.
- To operate the blender without pressing continuously, lock the Container (C
or F) into the power base (B) by turning it clockwise (Fig. 4).
- To stop the blender, release the container (C or F) by turning it anticlockwise.
- After use, unplug the appliance and wait for the blade set to stop turning
before removing the Container (C or F) from the power base (B).
- Turn the container (C or F) upright and place it on a flat surface. To open the
Container, unscrew the blade set (E).
- Pour the contents into a glass or fit the Container (C or F) with the special lid
(D or G) to carry it around throughout the day (Fig. 5).
Wash the Container (C or F) after use.
IMPORTANT NOTE
Prepare the container (C or F) with the ingredients for blending and close
it correctly with the blade set (E) before fitting it to the power base (B) and
plugging it into the mains power.
The blades are sharp; handle with care.
Do not leave the appliance running for more than 30 seconds. Brief pulses of a
few seconds each are best.
Never place hot liquids or fruit with stones or shells inside the container (C or
F) as they could damage the blade.
Ice cubes must never be crushed without liquid.