3
NOTICE
DANGER
WARNING
CAUTION
READING THIS MANUAL
Save these instructions & keep track of your product’s serial#
This manual contains important safety and operating information and instructions based on information
known by Canature. Canature has no knowledge of and makes no representations or warranties respecting
the product’s design, manufacturing, testing, packaging and inspecting.
Read all information and instructions and consider all information and follow all instructions when using this
product. Failure to consider this information and follow these instructions may result in property damage,
injury and/or death.
Throughout this manual, certain conventions are used, including;
Hazard symbols
– For your own safety, please pay strict attention! Examples include:
Hazard signals
– indicate the degree of harm that will or may occur, look like those below.
Temperature
White lettering with red background & safety alert symbol.
Black lettering with orange background & safety alert symbol.
Black lettering with yellow background & safety alert symbol.
White lettering with bright blue background.
Electrical
Motor Restart
Warranty exclusions
– these also require strict attention in order to protect your wise investment in water
security.
Notes
– help you take
full advantage of the system
and are used to emphasize
installation, operation, or
maintenance information
which is important but does
not present a hazard.
NOTE
Information being
emphasized.
INTRODUCTION
This pump has been carefully packaged, inspected, and tested to ensure safe operation and delivery. Before installing the
pump, check to see if any damage has occurred from rough handling.
Notify the dealer you purchased the pump from with the details of any damage.
This sewage pump is suitable for pumping sewage, effluent, groundwater, and other non explosive, non-corrosive liquids with
up to 51 mm [2”] solids. The pump includes a wide angle float switch that turns the pump on and off as the fluid level rises
and falls.
The manufacturer reserves the right to make product improvements which may deviate from the specifications and
descriptions stated herein, without obligation to change previously manufactured products or to note the change.
