4
NOTE
Always remove the plug from the
electrical outlet before servicing
this pump.
PUMP SPECIFICATIONS
Models
DSBF300/DSBW300
19 mm or ¾”
50 mm or 2”
Description
Automatic sump/effluent pumping 19 mm solids, cast
iron motor case, thermoplastic base.
Automatic sump/effluent pumping 50 mm solids, cast
iron motor case, thermoplastic base.
Motor
4/10 hp shaded pole, oil filled, thermally protected
supply – 120V 60 Hz.
4/10 hp shaded pole, oil filled, thermally protected supply
– 120V 60 Hz.
Power Cord
16 gauge, 3 conductor x 6.1 m long.
16 gauge, 3 conductor x 6.1 m long.
Pump Discharge
38 mm socket or NPT discharge.
20 mm socket or NPT discharge
SAFETY INSTRUCTIONS
The following safety rules should be followed to avoid serious injury or property damage.
1.
Check with your local electrical and plumbing codes to ensure you comply with the regulations. These codes have
designed with your safety in mind – be sure to understand and follow the rules.
2.
We recommend that a separate circuit be led from the home electrical distribution panel and properly protected with a
circuit breaker. We also recommend that a ground fault circuit (GFI) be used. Consult a licensed electrician for all wiring.
3.
Do not stand in water when connecting or disconnecting the power cord from the outlet.
4.
This product should be connected to a three prong grounded outlet equipped with a ground fault circuit interrupter.
5.
Do NOT pump flammable liquids with this pump as an explosion or fire could result.
6.
Vent sewage or septic tank according to local codes.
7.
Do NOT run this pump dry. Running this pump without water will damage the mechanical seal, reduce the life of
the pump, and void the warranty.
8.
Do NOT touch metal motor housing for at least 30 minutes after pump has operated. A severe burn will result if
pump is NOT allowed to cool.
9.
Do NOT lift the pump by the electrical cord.
10.
This product does NOT require lubrication. A special oil has been put into the motor housing at the factory for
lifetime lubrication of the bearings. Use of any other oil can cause damage and void the warranty.
