Setting the stitch length adjusting wheels
34
Service Instructions 969 - 01.0 - 12/2015
Fig. 23: Setting the lower stitch length adjusting wheel I
Setting steps
1. Position the upper stitch length adjusting wheel (3) > 3.
2. Switch the machine to short stitch length.
The key for the stitch length (1) does not light up.
If the key lights up, press key (1) again.
Fig. 24: Setting the lower stitch length adjusting wheel II
3. Hold the lower stitch length adjusting wheel (3) in place using the
wrench (7).
4. Loosen the screw (2).
5. Remove the lower stitch length adjusting wheel (3) from the shaft (5).
(1) - Key for the stitch length
on the machine arm
(2) - Lower stitch length adjusting wheel
(3) - Upper stitch length adjusting wheel
①
③
②
NOTICE
Risk of machine damage if the shaft is turned too hard.
If you turn the shaft too far, parts on the stitch regulator gear may
bend or get stuck.
Turn the shaft carefully and stop as soon as you feel a slight
resistance.
(1) - Upper stitch length adjusting wheel
(2) - Screw
(3) - Lower stitch length adjusting wheel
(4) - Adjusting mark
(5) - Shaft
(6) - Scale
(7) - Wrench
②
①
④
③
⑤
⑥
⑦
Содержание H-Type 969
