DURKOPP ADLER 869-M Premium, Инструкция по эксплуатации

Страница: 5 / 180

Table of Contents
Service Instructions 869-M PREMIUM - 00.0 - 07/2018 3
18.3.6 Assembling the handwheel flange ............................................ 89
18.3.7 Assembling the handwheel....................................................... 90
19 Programming .......................................................................... 91
19.1 Calling up the Technician level ................................................. 91
19.2 Structure of the software........................................................... 91
19.3 Lock technician level (
Lock Techn.
) submenu...................... 92
19.4
ParameterCall
submenu ...................................................... 92
19.5
Default Program
submenu.................................................. 94
19.5.1 Setting the Stitch length (
Stitchlen.
) parameter ................. 94
19.5.2 Setting the Foot pressure (
Foot Press.
) parameter............. 95
19.5.3 Setting the Needle thread tension (
Thr.Tens.
) parameter .......95
19.5.4 Setting the Sewing foot stroke (
Foot Stroke
) parameter...... 95
19.5.5 Setting the Start bartack (
Start Tack
) parameter................. 96
19.5.6 Setting the End bartack (
End Tack
) parameter ...................... 96
19.5.7 Setting the Thread cutter (
Thread Trim
) parameter.............. 96
19.5.8 Setting the Daily pieces counter (
DailyPieces
) parameter......96
19.6
Machine config.
submenu.................................................. 97
19.6.1 Setting the Thread cutter (
Thread Trim
) parameter.............. 98
19.6.2 Setting the Thread clamp (
Thread Clamp
) parameter ........... 99
19.6.3 Setting the Speed (
Speed
) parameter.................................... 101
19.6.4 Setting the Stop positions (
Stop Positions
) parameter ...... 101
19.6.5 Setting the Sewing foot (
Foot
) parameter ............................. 102
19.6.6 Setting the Needle thread tension (
Thr.Tens.
) parameter .... 102
19.6.7 Setting the Sewing foot stroke (
Stroke
) parameter .............. 103
19.6.8 Setting the Stitch length (
Stitchlen.
) parameter ............... 104
19.6.9 Setting the Bobbin (
Bobbin
) parameter................................. 104
19.6.10 Setting the Motor holding force (
Holding Force
)
parameter ............................................................................... 105
19.6.11 Setting the Pedal (
Pedal
) parameter..................................... 106
19.6.12 Setting the Needle cooling (
NeedleCooling
) parameter ....... 106
19.6.13 Setting the Seam center guide (
Center Guide
) parameter... 107
19.6.14 Setting the Puller (
Puller
) parameter................................... 107
19.6.15 Setting the Edge guide (
EdgeGuide
) parameter ................... 109
19.6.16 Setting the Material thickness detection
(
FabricThickness
) parameter............................................ 109
19.6.17 Setting the Correction of effects of high speed
(
Speed Corr.
) parameter .................................................... 110
19.6.18 Setting the Light barrier (
LightBarrier
) parameter............ 110
19.6.19 Setting the Segment length (
Mode Seg.Size
) parameter ..... 111
19.6.20 Setting the Threading mode (
Threading
) parameter ........... 111
19.6.21 Setting the Operation lock (
MachineBlockage
) parameter ... 111
19.7
User config.
submenu ...................................................... 111
19.7.1 Setting the Language selection (
Language
) parameter ........ 112
19.7.2 Setting the Parameter View (
ParameterView
) parameter ... 112
19.7.3 Setting the Input configuration (
Input Config
) parameter ... 113
19.7.4 Setting the Output configuration (
Output Config
)
parameter ............................................................................... 115
19.7.5 Setting the Additional inputs/outputs (
Add I/O
) parameter..... 116
19.7.6 Setting the barcode scanner (
Scanner
) parameter ............... 119
19.7.7 Setting the Interface (
Interface
) parameter ....................... 119
19.7.8 Setting the Stitch functions (
StitchFunctions
) parameter..... 119