DURKOPP ADLER 869-M Premium, Инструкция по эксплуатации

Страница: 161 / 180

Troubleshooting
Service Instructions 869-M PREMIUM - 00.0 - 07/2018 159
1055 Error Sewing motor overload • Eliminate stiff movement in
the sewing machine
• Replace encoder
• Replace sewing motor
1060 Error Sewing motor overload/excess
current/excess voltage • Check selection of machine
class
• Replace control
• Replace motor
• Replace encoder
1061 Error Sewing motor overload/excess
current/excess voltage • Check selection of machine
class
• Replace control
• Replace motor
• Replace encoder
1120 Error Sewing motor Init error • Performing a software
update
• Check selection of machine
class
1121 Error Sewing motor watchdog • Performing a software
update
• Check selection of machine
class
1203 Error Position not reached
• Thread cutting
• Turn Back • Check the controller settings
and change them if
necessary (thread cutter
setting, belt tension, etc.)
• Check position thread lever
at top dead center
1302 Error Sewing motor current error • Check Service Stop
• Eliminate stiff movement in
the sewing machine
• Replace encoder
• Replace motor
1330 Error No answer from sewing motor • Performing a software
update
• Replace control
2101 Error DA stepper card X reference run
timeout • Check reference sensor
2105 Error DA stepper card X blockage • Eliminate stiff movement in
the sewing machine
2121 Error DA stepper card X encoder plug
(Sub-D, 9-pin) not connected • Connect encoder cable to
the control, use the correct
interface
2122 Error DA stepper card X flywheel
position not found • Check connection cables
• Check stepper motor 1 for
stiff movement
2130 Error DA stepper card X not
responding • Performing a software
update
• Replace control
Code Type Meaning Remedial action