DURKOPP ADLER 869-M Premium, Инструкция по эксплуатации

Страница: 94 / 180

Programming
92 Service Instructions 869-M PREMIUM - 00.0 - 07/2018
A further branching into the submenus cannot be shown here for reasons
of space. A corresponding overview of the menu items appears at the
beginning of each chapter.
19.3 Lock technician level (
Lock Techn.
) submenu
There are two options to exit the Technician level: the first one will allow you
to access the Technician level again without re-entering your password
while the other will result in a prompt to enter your password for re-gaining
access to the Technician level.
Secure option to exit the Technician level
1. Select the
Lock Techn.
parameter.
2. Press the OK button to confirm the parameter.
 You are on the Technician level. After pressing the buttons P and S ,
you will not be able to access the Technician level unless you
re-enter your password.
Non-secure option to exit the Technician level
1. Exit the Technician level with a press of the
◄
button or the ESC button.
 You are on the Technician level. You can access the Technician level
by pressing the buttons
P and S without the need to enter your pass-
word again.
Information
If accessing the Technician level by means of a USB key, you will exit the
Technician level automatically when removing the USB key.
19.4
ParameterCall
submenu
The submenu is visible only if the
ParameterView
parameter ( 
p. 112
) is active. The settings for a
parameter can be changed directly here.
To change the parameters:
1. Select the menu item
Service > ParameterCall
.
2. Press the OK button to confirm the selection.
 A window appears where the parameter can be selected: