DURKOPP ADLER 869-M Premium, Инструкция по эксплуатации

Страница: 98 / 180

Programming
96 Service Instructions 869-M PREMIUM - 00.0 - 07/2018
19.5.5 Setting the Start bartack (
Start Tack
) parameter
Setting whether the start bartack is automatically activated in a new
program.
19.5.6 Setting the End bartack (
End Tack
) parameter
Setting whether the end bartack is automatically activated in a new
program.
19.5.7 Setting the Thread cutter (
Thread Trim
) parameter
Setting whether the thread cutter is automatically activated in a new
program or not.
19.5.8 Setting the Daily pieces counter (
DailyPieces
) parameter
The daily pieces counter can count upward or downward. It is also possible
to enter the value to be selected when the counter is reset.
Menu item Setting option
On The start bartack is activated automatically. The values for the start
bartack are taken from the Manual mode.
Off The start bartack is not activated.
Menu item Setting option
On The end bartack is activated automatically. The values for the end
bartack are taken from the Manual mode.
Off The end bartack is not activated.
Menu item Setting option
On The thread cutter is activated automatically at the end of a seam
section and at the end of the sewing program.
Off The thread cutter is not activated.
Menu item Setting option
CntMode
Off – the counter is off
Up – the daily pieces counter counts upward
Down – the daily pieces counter counts downward
Reset
Enter the value to which the daily pieces counter should return when it
is reset (value range -999 - 999).