Duratuf MARLBOROUGH, Руководство по сборке

Страница: 2 / 30

2 2
BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE
SOME IMPORTANT POINTS
TOOLS REQUIRED
• Drill
• Hex Drive (5/16)
• Hex Drive (3/8)
• Drill Bit 3.5mm
• Drill Bit 10mm
• Square Drive Drill Bit
• Phillips Drill Bit
• Slotted Drill Bit
• Riveter
• Hammer
• Tape Measure
• Ladder
• String Line
• Adjustable Spanner
• Level
• Hand Saw
• Caulking Gun
• Tin Snips (Left & Right Hand)
• Flat file (For Roller Door)
• Pipe Wrench (For Roller Door)
• Skillsaw and Jigsaw (For optional timber floor)
• Masonry Drill and 12mm Masonry Bit (for concrete floor)
BEFORE YOU START
• Read all instructions carefully.
• Identify all parts and check quantities against checklist, before starting.
SAFETY
• Do not attempt to build your shed in high winds.
• Beware of sharp edges.
• Protect your eyes and ears.
• Use electronic tools with care. Use a Safety Trip Switch.
• It is easier and quicker if this shed is erected by two people.
SELECT YOUR SITE
• Your shed must be level. Achieve this by either levelling the ground or by using blocks.
• If your shed is to be positioned on wet or damp ground, we recommend that your shed is raised up off the
ground slightly.
WARRANTY REQUIREMENTS
The following maintenance process needs to be adhered to, to qualify for the steel warranty of your Duratuf
Guardian shed.
• Wash all surfaces annually using a hose and soft nylon brush.
• Within 2 km of coast – wash every 3 months as above. After a storm, wash the cladding and the gutters as
soon as possible to remove any highly corrosive salt deposits.
• Volcanic Ash Fallout – wash as soon as possible, removing fall out from roof and gutters.
• Do not allow manures, chemicals or other corrosive materials to have direct contact with cladding.
2