We have engineered the Delphi Indy car to take the rough
and tumble abuse that makes R/C vehicles fun. We are so
confident of the quality and durability of the Stress-Tech
plastic parts that we will replace any Stress-Tech plastic part
you break during the first 12 months you own the vehicle. Just
send in the part to us and we will send you a FREE
replacement. Please see the Delphi Indy cars parts list for the
items covered under the Stress-Tech guarantee.
To receive your free replacement part, please send the
following to the Hobby Services address listed on the cover
of this manual.
❏
1.The broken part must be included.
❏
2.The part number and description of the broken part.
❏
3.Dated copy of your invoice or purchase receipt.
❏
4.Your name, phone number and shipping address.
•
Repair service is available anytime.
•
After the 90 day warranty, you can still have your Delphi
Indy car repaired for a small charge by the experts at
DuraTrax's authorized repair facility, Hobby Services, at
the address listed on the front page of this manual.
•
To speed up the repair process, please follow the
instructions listed below.
❏
1.Under most circumstances return the ENTIRE system:
vehicle and radio. The exception would be sending in a Stress-
Tech part. See the instructions under Stress-Tech Guarantee.
❏
2.Make sure the transmitter is turned off and all of the
batteries are removed.
❏
3.Send written instructions which include: a list of all items
returned, a THOROUGH explanation of the problem, the
service needed and your phone number during the day. If
you expect the repair to be covered under warranty, be sure
to include a proof of date of purchase (your store receipt or
purchase invoice).
❏
4.Also be sure to include your full return address.
All pictures, descriptions and specifications found in this
instruction manual are subject to change without notice.
DuraTrax maintains no responsibility for inadvertent errors
in this manual.
To operate the Delphi Indy car the following items
are required:
❏
DurTrax 6-cell battery pack (DTXC2030)
❏
DuraTrax 6-7 cell charger (DTXP4000)
❏
Hobby knife (HCAR0105)
For the pre-built version of the Delphi Indy car, you will
also need:
❏
2-Channel radio with one (1) standard servo (FUTJ13**).
Note: The electronic speed control is supplied with a
Futaba connector. The receiver must be equipped to
accept these plugs.
❏
Eight (8) “AA” batteries for the transmitter
❏
#2 Phillips head screwdriver (Not Included)
❏
Needle nose pliers (Not Included)
❏
Nut driver (4-way)
❏
Hex wrenches
INCLUDED TOOLS FOR MAINTENANCE
AND TUNING
TOOLS NEEDED FOR COMPLETION
AND MAINTENANCE
REQUIRED ITEMS FOR COMPLETION
SPECIFICATION & DESCRIPTION CHANGES
REPAIR SERVICE
STRESS-TECH PARTS GUARANTEE
3
