Duratrax Delphi Indy Car Скачать руководство пользователя страница 16

OPTIONAL SHOCK SPRINGS 
Some basic guidelines when setting up the Delphi Indy car
are that if the rear end is stiff (by using harder rear springs or
softer front springs) it will give the car more steering and have
less rear traction. Stiffening the front will result in less steering
and more rear traction. (Note: Just changing the position of the
threaded shock pre-load adjusters will only result in ride-
height change. It does not change the spring tension).

TIRE TIPS
Typical with pavement style cars like the Delphi Indy car, tire
selection is the most important tuning component you can
make. Installing softer compound tires (whether rubber or
foam) will give you more traction but will wear faster. Installing
harder compound tires will result in less traction but better
wear and durability. Typically, choosing a slightly softer tire for

the rear and a harder tire for the front will give you a car that
will under-steer or push. This is a good set up when learning
to race as it is much easier to drive. Use the many available
tire compound options to tune your car to your driving style.
For example, if your car doesn't turn in hard enough at the
end of the straight (pushes), try using softer front tires.
Conversely, if your car tends to dive quickly into corner and
breaks loose the rear end easily, use a harder compound
front tire. If your car tends to break loose easily in tight high
speed corners. Try using softer rear tires.

There are many different settings for the Delphi Indy car. An
important tip is to only do one thing at a time and test run each.

Have fun!!!

OTHER PRODUCTS AVAILABLE FROM DURATRAX

IntelliPeak

Pulse Chargers give each battery a full charge,

whether it’s a NiCd or a NiMH pack. Use at home or at the
track, to charge, discharge, or even cycle a pack
automatically. 1-year warranty.

DTXP4100 AC/DC Pulse Charger,
DTXP4110 AC/DC Mini Pulse Charger,
DTXP4120 AC/DC Deluxe Pulse Charger,
DTXP4130 AC/DC Digital Pulse Charger

Race economically with the Shark 6-cell 1500mAh sport
pack (DTXC2030)...or go for explosive output current
and all-out speed with Sanyo 1900SCRs (DTXC2130)!
Both are assembled and ready to run.

Race economically with the Shark 6-cell 1500mAh sport
pack (DTXC2030)...or go for explosive output current
and all-out speed with Sanyo 1900SCRs (DTXC2130)!
Both are assembled and ready to run.

Pit Tech

Deluxe Car Stand

It's a convenient work station for your cars — anywhere you
want! The sturdy stand disassembles easily and stores flat...a
space-saving feature for carrying in a toolbox or field bag. The
plate rotates for all-sides access, and built-in holes keep
shocks handy when rebuilding. An extra-large parts tray in the
base offers added convenience. Molded rubber inserts grip
chassis securely.
DTXC2370 Pit Tech Deluxe Car Stand (Blue)
DTXC2371 Pit Tech Deluxe Car Stand (Orange)
DTXC2372 Pit Tech Deluxe Car Stand (Purple)
DTXC2373 Pit Tech Deluxe Car Stand (Green)

DuraTrax Deluxe Field Bag (DTXP2010)
Keep your radio and other gear ready for action—store it in
this heavy-duty black nylon field bag, with water-resistant vinyl
bottom. Stitched handles, detachable shoulder straps and a
zippered top add security. Measures 27” x 14” x 12-1/2”.

Содержание Delphi Indy Car

















Отзывы: