1.4 FUNCTIONING
Megavoice has 4 different modes : day 1, night 2, vacation 3 and programming 4.
Every line has separate messages and line type (functioning) in each different
Megavoice mode. The line functioning can be adjusted to work with nearly any
equipment. Megavoice programming lines can be connected together. Then only the
right megavoice with right password do not hang up.
1.5 EXAMPLE 1, ANSWERRING MACHINE AND MUSIC ON HOLD AND REMOTE
MAINTENANCE,
Line 1 and 2 are connected to extentions 207 and 208. Line 1 has type 16 and line 2
has 128. Line 1 answers and gives informative announcenment “ Our office hours are
… “ Line 2 in a Music on hold source for the PABX. The system can be programmed
with line 1 with login-command before the messsage starts.
1.6 EXAMPLE 2, E&M LINES WITHOUT E-LINE (Busy) DETECTION
Line 1 and 2 are connected to PABX E&M-lines. Line types are 25. The message starts
when there is a start pulse via M-wire. Megavoice has CTI-line connected to 1srt E&M-
signal pair. 1st Teleline is connected to extention. Remote programming is done using
L1 teleline and other times the E&M -messages operate normally.
1.7 EXAMPLE 3, E&M WITHOUT M-SIGNAL (start)
Line 1 and 2 type 144. Both lines give continous message on E&M lines. E-wire
indicates when the message is on and a short off state when the message starts again.
1.8 EXAMPLE 4, CONTINOUS MESSAGE AND REMOTE PROGRAMMING
Line 1 has CTI-circuit. CTI-is connected to extention 208. L1 teleline is connected to
207. Line 2 is connected to 209. Line 1 type is 153, line 2 has type 128. CTI-line and L2
gives continous message but it is possible to call for programming the L1 teleline.
1.9 EXAMPLE 5, TRANFERRING MACHINE
Line 1 has type 50 and answer delay is 2 and it is connected to 207 The transferring
number is 0 04001223456. The message 1 is “ the call is been transferred, please hold
on “. All calls are transferred and the user can change the transfer target number using
remote programming. This is follow me service
1.10 EXAMPLE 6 TRANSFERRING MACHINE AND NIGHT MESSAGE
Line1 has type 50, answer delay is 1 and extention number is 207. All calls go to 207.
Transferring target number is 55, which is a extention series having extention 208. Line
2 ihas type 50 , answer delay 10 and transfer target is 55 and it is conncted to 208.
Line 1 wellcomes Message 1“ This is telephone service” and is there is no answer
there is a another message from line 2 after apx 50 s message 2 “You are still on a line.
Please hold on”. During night time L1 has type 16 and message 3, which is “ Our office
hours are … Please call again”.
5
MEGAVOICE 2000 V.3.1 MANUAL V.2000-09-20
