Power cable
Lenght 2 m
Line cable
CABLE KIT
Power cable
Lenght 2 m
Line cable
CABLE KIT
L
CABLE
1 : Lines 1 ja 2.
pin
Pair
Color
Signal
12
1.
Green
Teleline 1. a-wire, Acts also as 600 ohm interface.
13
Red
Teleline 1. b-wire
24
3.
Blue
600 Ohm/teleline a-wire, CTI line.
25
White
600 Ohm/teleline, b-wire, CTI-line
OTHER LINE INTERFACES IN D25 :
pin
Pair Color
Signal
22
Yellow
Not connected.
23
Black
N.C.
14
Blue
2-liune, M input
15
White
2-line, E output
INE CABLES
6-wire flat cable, 0.14mm2 . No metallic screws. Color code 1-6: blue,yellow,green,
red,black,white.
Flat cable can be conncted to RJ-connectors, which can have adaptors. D25 female
connector.
10
2.
Yellow
Teleline 2. a-wire, Atcs also as 600 ohm interface.
11
Black
Teleline 2. b-wire
1
Green
1.line M input, (Mouth, Start, V+ control input , 8...60 V )
2
Red
1. line E output, (Earth, Busy, V+ coltage out, 2...60V )
POWER CABLE
2
4-wires flat cable 0.14 mm . Power connector 2.1 mm female DC-connector, middle contact
V+. Connected to power supply. Secure DC-connector with cable strap.
D25 Pair
Expanation
6
(7.)
Green, V-, (-48V system -48V).
8
Red, V+, (-48V system 0V )
5
Frame
ground
4
V- out, D25/3 is E&M system V- input. Connect together is E&M used.
17
V+ out, D25/16 is E&M system V+ input. Connect together is E&M used.
16
E&M system V+ input, used only for E-wire pull up.
3
E&M system V- input, Only used for E&M.
D25-connector:
19-20 connected, Operation voltage is 12V (11-24V). As default setting
If 19-7 connected and 19-20 are not , Voltage is 24V. If 20,19 ja 7 not connected means
voltage is 48V.
2
Note 1.:
LSA+ accepts 0.13-0.5 mm cable. Line cables can be used with it.
Note 2.
: Typical pair numbering is marked above.
4
1.3B SCHEMATICS 2 . CABLE KIT. VERSION 2.
4
MEGAVOICE 2000 V.3.1 MANUAL V.2000-09-20
