DuraTech Industries Haybuster Balebuster 2620 Скачать руководство пользователя | Manualshive

Страница: 44 / 126

background image

34

2 6 2 0 B A L E B U S T E R

O P E R A T I N G I N S T R U C T I O N S

3.8 Shredding the bale

CAUTION:

Avoid uneven terrain with bale loaded. Serious injury could result if machine is

allowed to tip.

NOTE:

Operating tractor at 1000 RPM allows machine to do a better job of chopping forage and

also keeps a minimum of twine buildup on rotor. Twine buildup should be kept to a minimum to
reduce fire hazard.

NOTE:

Always operate slat conveyor to rotate bale in direction indicated by arrow on front shield.

Reverse direction only if bale is lodged or hesitates to turn.

DANGER:

If it is necessary to transport a second bale over uneven terrain, make sure any bystanders

are away from the 2620 BALEBUSTER. Serious injury or death could result if the bale rolls off the
loader tines.

With a bale loaded into the shredding chamber, perform the following steps:

1.

If necessary, adjust the deflector to the desired position.

2.

Position the 2620 BALEBUSTER where you want to begin shredding the bale.

3.

Engage the conveyor and move the bale to the left side of the machine. This will move the bale away
from the rotor for startup.

4.

Machines hydraulic system performs two (2) functions. One function raises the bale lifter for loading
bales into machine. The second function powers bale conveyor by means of a hydraulic motor. Decreasing
speed allows flail knives to chop forage finer, increasing speed leaves forage coarser.

5.

Engage the P.T.O., and increase tractor engine speed so that P.T.O. is at 1000 RPM.

6.

Engage the bale conveyor, and check to see if bale
is rotating in the proper direction. The proper
direction of bale rotation is indicated by the bale
rotation decal located on the front of the 2620
BALEBUSTER.

«
...
42
43
44
45
46
...
»

Содержание Haybuster Balebuster 2620































































































































Отзывы:

Нет отзывов

Похожие инструкции для Haybuster Balebuster 2620

Бренд: Falcon Страницы: 52

Бренд: Makita Страницы: 17

Бренд: Makita Страницы: 13

Бренд: MADRIX Страницы: 12

Бренд: Narcotrend Страницы: 47

Бренд: Ocmis Irrigazione Страницы: 100

Martin ERA 800 Performance

Бренд: Harman Страницы: 32

Martin ERA 600 Performance

Бренд: Harman Страницы: 32

Бренд: Hardt Страницы: 22

Бренд: Sabre Страницы: 2

Бренд: jablotron Страницы: 2

Бренд: jablotron Страницы: 2

AquaPure Ei Series

Бренд: Jandy Страницы: 4

AquaPure Ei Series

Бренд: Jandy Страницы: 8

Jandy Pro Series

Бренд: Jandy Страницы: 16

Бренд: Jacto Страницы: 12

Бренд: SandenVendo Страницы: 19

Бренд: ZOLL Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды