DuraTech Industries Haybuster Balebuster 2620, Инструкция по эксплуатации и справочник по запасным частям

Страница: 29 / 126

19
2 6 2 0 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
P.T.O. Shield
3.3.5 Slugbar Adjustment
Exposing, less flail will create a finer cut and use less horsepower, while exposing more flail will produce a
coarser cut.
This is accomplished by rotating the slugbar adjustment handle. Rotating the handle clockwise will expose more
flail, counterclockwise will expose less flail. To rotate the handle, squeeze the lever to release the lock and rotate
the handle to the desired position, and release the lever. Be sure that the lever is seated in one of the adjustment
slots to ensure that slugbars stay properly adjusted.
With the handle rotated fully counterclockwise the will expose the least amount of flail (position 1).
Position Approx. Flail Exposed
1 3/4“
2 7/8"
3 1-1/8"
4 1- 1/4"
5 1-3/8"
Positions 1 through 3 are for grinding hay. Positions 4 and-5 should only be used when spreading Dry Straw. ( DO
NOT, use positions 4 and 5 if material is wet, has high moisture content or is frozen.)