manualshive.com logo in svg

DuraTech Industries Haybuster Balebuster 2620, Инструкция по эксплуатации и справочник по запасным частям, Страница: 37 / 126

Поделиться
Скачать
DuraTech Industries Haybuster Balebuster 2620 Скачать руководство пользователя страница 37

27

2 6 2 0   B A L E B U S T E R

O P E R A T I N G   I N S T R U C T I O N S

3.3.19  Grain Hopper (Option) Calibration Procedure

Step 1.

Acquire the following information needed to fill out the calibration worksheet.

A.

The amount of hay (lbs.) that you feed per animal at each feeding time.

B.

The amount of feed supplement (lbs.) that you feed per animal at each feeding time.

C.

The average weight (lbs.) of the bales that are to be supplemented.

D.

The average time (min.) required to process a bale that is to be supplemented.

E.

The density (lbs. per bushel) of the feed supplement.

Step 2.

Input the above information into the calibration worksheet (page 2) and calculate the “Required
Hopper Feed Rate” to obtain the desired supplement to feed ratio.

Step 3.

With the bale processor properly attached to the tractor operate the hopper making sure that both
augers operate properly.  While feeding and calibrating, the auger must rotate in the direction
indicated by the arrow on the indicator wheel located at the front of the hopper.

Step 4.

Using line 7 from worksheet set the flow valve at the baseline setting using the charts on page 28.

NOTE:

  The Pipe Thread Motors and 0-Ring Motors, DO NOT Run at the same speed.  *Verify

Orbit Motor Style, make sure to use the correct chart.

Step 5.

Fill the hopper with the feed supplement.

Step 6.

With the tractor running at operating speed, operate the augers and collect the supplement,
measuring the time required to fill a container.  Adjust the flow valve up or down until the desired
rate is obtained.

Содержание Haybuster Balebuster 2620































































































































Отзывы:

Нет отзывов