manualshive.com logo in svg

DuraTech Industries Haybuster Balebuster 2620, Инструкция по эксплуатации и справочник по запасным частям, Страница: 30 / 126

Поделиться
Скачать
DuraTech Industries Haybuster Balebuster 2620 Скачать руководство пользователя страница 30

20

2 6 2 0   B A L E B U S T E R

O P E R A T I N G   I N S T R U C T I O N S

3.3.6 Clean Out Door

WARNING:

  Before opening the clean out door, be sure and follow the normal shut down

procedure.  Be certain that the tractor is shut off and all rotating components of the machine have
come to a complete stop before opening clean out door.

The clean out door allows for easy access to the rotor for flail changes and twine removal. To open the door remove
the lynch pins and release the latches. Lift the latch hooks and open the door.

To close the door, hook the latch hooks and close the handles. This should draw the door in tight. If the door is loose
or can not be closed, check for obstructions. Hooks can be adjusted by screwing them in or out of the latch. Once the
door is closed, replace the lynch pins.

3.3.7 Flails

Flails are to be free to rotate about the bushings on the
rotor. The bushings should not rotate. The bushings are
held secure by tightening the bolts and squeezing the
tabs against the bushing. The bolts should be torqued to
180 ft.-lbs.

figure 3.3
clean out door, rotor and
flails

clean out door latch

rotor

flail

clean out door in the
open position

flail tightening bolt

Содержание Haybuster Balebuster 2620































































































































Отзывы:

Нет отзывов