13
Connecting to a Midmark/Ritter M3
1
Shut off the M3 and disconnect its power cord�
2
Connect the high-temperture Teflon
®
tubing
provided to the back of the M3 as shown, and
also to the high-temperature Kynar inlet on
the VistaCool manifold�
3
Insert the 3�5mm mono plug provided with
the VistaCool into the back of the M3 to
override the flow display alert function�
4
Reconnect the M3’s power cord and resume
operation�
0
1
2
2
3
VistaCool Model V7502 has been verified for installation on Midmark/Ritter M9 & M11 units with the
use of the S7560 adapter kit� Only M9, M9D, M11 and M11D (-02X, -03X) units with
green
displays can
be connected to VistaCool� First generation models with
red
displays (-0XX) are not compatible�
The single-unit VistaCool (V7501) should
not
be used with Midmark/Ritter M9 or M11 units� The
double-unit VistaCool (V7502) is capable of handling any two compatible autoclaves�
Complete installation instructions for the M9 & M11 units are included with the S7560 adapter kit�
IMPORTANT INFORMATION
Midmark/Ritter M9 & M11 Compatibility
Autoclave-Specific Instructions
Connecting to a SciCan STAT
IM
2000/5000
Use of the VistaCool systems with SciCan STATIM 2000 & 5000 autoclave units requires no additional steps
beyond the general instructions outlined in pages 6-12 of this guide�
For questions regarding the performance of an autoclave, please contact the autoclave manufacturer�