Durafly BF-110, Инструкция по сборке и эксплуатации

Страница: 7 / 24

4
3. Locate the plywood wing spar and glue it into either one of the wing panels. Push
the spar into the wing until the center of the spar meets the edge of the wing panel
as shown. Apply some glue to this same edge and the exposed portion of the spar.
Now push the remaining panel fully onto the spar until both sides meet, ensuring
both wing halves are completely aligned with one another at the center and that all
wires are pulled neatly through to the top of the wing. It is recommended that you
do a dry assembly of all parts first.
4. Glue both wing bolt plates into place on the wing and set the wing aside until
the glue has completely cured. Again ensure the wing remains fully aligned at the
center when left to dry.
EN
FR
DE
RU
CN