Durafly BF-110, Инструкция по сборке и эксплуатации

Страница: 14 / 24

BF-110
11
SETTING UP YOUR MODEL:
1. Once you have established a connection between your receiver and transmitter
turn on your transmitter followed by your receiver (by connecting your 2200mah 3s
lipo to the speed controller (ESC). Also ensure the battery is fully charged.
2. With the electronics powered up and the servo's centered, ensure that all control
surfaces are level. If not, adjust by turning the control clevis's accordingly until the
control surfaces are level as shown below.
3. Check all control surfaces are moving in the correct direction with the correct stick
input (see below).
Aileron
(Roll)
Elevator
(Pitch)
Rudder
(Yaw)
Roll left
Roll right
Pitch up
Pitch down
Yaw left
Yaw right
Elevator Rudder Aileron