Durafly BF-110, Инструкция по сборке и эксплуатации

Страница: 10 / 24

BF-110
7
9. With the fins firmly glued in place, the rudder control rods can be installed. Power
up the servo’s to center and raise the arms. You’ll now be able to access the control
horns easily to connect the push rods as shown.
10. Locate the elevator control horns and install as shown. Connect the rudder servo
leads to the Y-lead that’s taped in place at the rear exit of the fuselage.
11. Pull forward into the fuselage as much of the rudder Y-lead as possible. Then with
the tail plane turned over, apply glue to the entire portion of the fuselage shown.
PB1.7 x 10mm