Durafly BF-110, Инструкция по сборке и эксплуатации

Страница: 4 / 24

88
BF-110
1
INTRODUCTION:
Thank you for purchasing this Bf.110 from Durafly, the worlds first Plug and Fly model
of this classic WW2 fighter. The Durafly PnF Messerschmitt Bf.110 is a close to scale
model of the iconic German twin engined fighter. Durafly have captured perfectly the
aggresive looks and outline of this impressive aircraft but with the quality, ease of
construction and great flying characteristics Durafly is famous for. Thanks to the
Bf.110’s PnF format, the part count is minimal and assembly is very straight forward so
you’ll be flying in no time at all. All included electronics are pre-installed (brushless
motors, ESC’s, servo’s and electronic retracts) and only a few additional items are
required to complete the model (see ‘required to complete the model').
On the ground and in the air, your mastery of the Bf.110 will be complete thanks to its
extremely well mannered handling characteristics and wide ranging performance. Twin
engined models add a unique dimension to model flying and you won’t be disappointed
with the Durafly Bf.110.
SPECIFICATIONS:
Wingspan: 1200mm
Length: 900mm
Flying weight: 1300-1400g
Controls: 5 channel (Ailerons, Elevator, Throttle, Rudder, Retracts)
ESC: 2 x 20amp Brushless speed controllers (pre-installed)
Motor: '2620' 1350Kv Brushless Outrunners (pre-installed)
Landing gear: Metal trunnion electronic retract units (pre-installed)
Prop: 2 x 8x4 scale 3 blade props (included)
Battery: 11.1V (3S), 2200-2700mah Lithium polymer (lipo), min 25C, recommended.
Radio system: minimum 6 channel Rx and Tx required.