10
Note: Refer to Appendix B (split-phase 120/240) or Appendix C (three phase 120/208) at the end of this manual
for the following instruction:
3
Terminate the loose end of the trunk cable in an AC junction box rated for use and installed as per the
local electrical code.
5.7 Installation: mounting the microinverter
1
Mark the approximate center of each panel / panel cluster on the frame.
2
Fix the screw(s) on the rail.
3
Hang the microinverter on the screw (see picture below), and tighten the screw(s).The silver cover side of the
Microinverter should be facing the panel.
Installer supplied
junction box – located at
the PV array
Branch
circuit to
distribution
panel
Installation Manual
Содержание D1500-M4
