3
3/4' Grapevine Arbor
On clean flat surface lay out one 60½" left leg (part 1). Insert 28" center cross rail (part 4) into middle hole and one 28"
top/bottom cross rail (part 3) into hole at bottom of leg. Insert 53" tubes (part 5) through holes in center cross rail and
into top/bottom cross rail. Insert remaining top/bottom cross rail (part 3) into remaining hole in leg, inserting 53" tubes
into top/bottom cross rail. Insert free ends of 28" cross rails into one 60½" right leg (part 2). Using six ¾" screws, screw
together arbor panel. Be sure that all parts are fully inserted into legs before.
Repeat this step to make second arbor panel.
