manualshive.com logo in svg

Duplo DC-645, Инструкция по эксплуатации, Страница: 83 / 106

Поделиться
Скачать
Duplo DC-645 Скачать руководство пользователя страница 83

82

Warning Display

A warning display appears on the LCD panel when attempting to process a JOB when the machine is not ready.
In such case, take measures according to the following instructions.

CHANGE MODULE

Message

Countermeasure

A module not specified in the JOB selected is set on the machine.
Set the optional module of the machine to the module displayed on
the LCD panel.

CHANGE MODULE

        STANDARD

SET SLIT MODULE

There is no slitter module.
Install a slitter module in the machine.
One or more slitter module is not set in the machine.

SET SLIT MODULE

COVER OPEN

The top or front cover is open.
Close the top or front cover.

   COVER OPEN

BLANK DATA

Program a new JOB in the JOB no. if necessary.

   BLANK DATA

USB-IF SUSPENDED

The machine is out of communication with a computer.
(When a computer is in standby status or sleep status, wake up the
computer and then press the   <STOP> key to cancel the error.)
1. Turn OFF this machine. Then pull out and re-insert the USB

cable.

2. Contact the servicing personnel.

USB–IF SUSPENDED

Содержание DC-645











































































































Отзывы:

Нет отзывов