Duplo DC-645, Инструкция по эксплуатации, Страница: 11 / 106

10
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
64
Basic Operations
This chapter describes the operating sequence from turning ON the power switch until completing
finishing process.
Chapter
4
Process Documents by Selecting JOB
This section describes the procedures to process documents by selecting each JOB manually.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Turn ON the power. ( a a
a a
a P.16 “Turning ON the Power”)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Press the <MODE> key and go to the
[SELECT] display.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Input the number of the JOB to call up, using the <Number> key.
[ SELECT ]
05:DUPLO
06:DUPLO 1
BC REG AC
∗ ∗ ∗
F
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Press the <SET> key to call up the JOB of
the number input.
How to execute batch counting
• The specified number of document are processed.
Select or input a job and then press the <Number> key in
standby state (excluding SELECT/INPUT display) to input the
number of document for batch counting. (The specified
number of document is displayed in the lower right portion of
the control panel.)
∗ ∗
100/100
By pressing the <START> key, processed number of the
document is subtracted from the specified number as below.
(Ex.: When 100 documents are set, the above display appears.)
∗ ∗
99/100
∗ ∗
98/100
* If an error has occurred during processing, batch counting can not be executed.
Notes on Safety (Please Read and Observe)
Conventions Used in This Manual
Each page of descriptions in this manual of how to operate the DC-645 is set up as follows.
■
Pictorial Symbols and Other Notations Used in This Manual
IMPORTANT : Introduces instructions for correct operation of the machine. If these instructions are ignored,
the machine may not be able to operate at optimum performance or may break down.
Tip : Introduces information that is useful for operation and maintenance of the machine, or
information about the machine’s performance, etc.
Continue Page
• • •
: Indicates that the description of the operating sequence is continued on the next page.
(
a
P.00 “xxxx”) : Indicates the page number and item containing related information.
Chapter
Description of operational steps
Each step is described in detail.
Illustrations
The illustrations provide a visual
reference to which keys to operate
and other related conditions.
Title