Duplo DC-645, Инструкция по эксплуатации, Страница: 50 / 106

49
12
Prog
ram JOB f
o
r DC-645
Via Computer
(J
O
B
C
re
a
to
r)
Setting Frequent Functions From Computer
(“Function Setting”)
This describes the procedures to turn ON/OFF the barcode function, REG. Mark function and other functions.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Click the [Function Setting] button.
The display to turn ON/OFF the
function appears.
Tip
• The current DC-645 settings will
appear at this time.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
If you set to [Enable] on “Reject,”
input the number of rejected
documents to stop the JOB.
Input “0” or click the [Disable] radio
button if DC-645 is not to be stopped
regardless of number of rejected
documents.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Click the [Enable] radio button for
function to turn ON. Click the
[Disable] radio button for functions
to turn OFF.
JOB Creator Settings
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
If you set to [Enable] on “Apply
Shrinkage,” input the pri-print
length and post-print length so the
machine can automatically calculate
the shrinkage rate and improve the
JOB processing precision.
Use the <Number> key to first input
the document length before printing.
Next, input the length of the
document after printing.
Continue Page
• • •