Duplo DC-645 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 106

Duplo DC-645 Скачать руководство пользователя страница 82

81

25

T

roub

leshooting

Error Display

ELEVATOR ERROR (E8)

Message

Countermeasure

This is an elevator error.
Remove the document in the machine and press the <STOP>
key.
1. Turn OFF the power. Then turn ON the power again, to reset the

machine.

2. Contact the service personnel.

––– E 8 –––

ELEVATOR ERROR

CREASE ERROR (E9)

This is a creaser module error.
Remove the document in the machine and press the <STOP>
key.
(

a

P.89 “When “CUTTER OR CREASE” is displayed”)

1. Turn OFF the power. Then turn ON the power again.
2. Carefully open the Top Cover 3. Check to see if there are any

paper in the operation range of the creaser module. If there is any
paper identified, carefully remove it.

3. Contact the service personnel.

––– E 9 –––

CREASE ERROR

DOUBLE FEED (E11)

Double-feed was detected.
Remove the document in the machine, then press the <STOP>
key.
1. Turn OFF the power. Then turn ON the power again, to reset the

machine.

2. Satisfactorily flip through and loosen the document sheets in the

feed tray.

3. Adjust the feed. (

a

P.70 “Adjust Feeder”)

4. The Double-Feed Error is displayed when the Double-Feed

Detection is ON and Reject is OFF.
By keeping Reject ON, the detected document will automatically
be output to the reject tray.

––– E 11 –––

DOUBLE FEED

REJECT ERROR (E12)

This is an error in the reject area.
Remove the document in the machine and press the <STOP>
key.
(

a

P.98 “When “REJECT AREA JAM” is displayed”)

1. Turn OFF the power. Then turn ON the power again.
2. Carefully open the front cover. Then check if there are any paper

in the reject area. If there is any paper identified, carefully
remove it.

3. Contact the service personnel.

––– E 12 –––

REJECT ERROR

GUTTER ERROR (E14, 15)

This is displayed when the gutter guide does not return to the home
position within a designated time.
Remove the document in the machine and press the <STOP>
key.
1. Turn OFF the power. Then turn ON the power again.
2. Carefully open Top Cover 3. Check to see if there are any paper

in the operation range of the gutter deflector. If there is any paper
identified, carefully remove it.

3. Contact the service personnel.

––– E 14 –––

GUTTER ERROR R

«
...
80
81
82
83
84
...
»

Содержание DC-645











































































































Отзывы:

Нет отзывов