- 24 -
7. Suggestions
Removing jammed paper from the cutter or ejection unit
¥
If you will have to put your hands near moving parts to
remove the jammed paper, first remove the power cord
plug from the outlet.
¥
The cutter unit and slitter unit contain hazardous
cutting edges inside them. Keep your hands away from
these units' interiors.
¥
To remove jammed paper, use the tweezers included in
the accessories, or a similar tool.
WARNING
1. It is sometimes possible to remove the paper by pressing
the "
3
" key to move it forward, and the "
4
" key to move
it backward.
* Using these keys may however make the paper jam
worse. Watch the condition of the jammed paper as you
operate the keys.
1. Turn off the power switch, and pull the power cord plug
out from the outlet.
2. Open the rear safety cover. If the paper is jammed in the
cutter unit, open the front safety cover.
3. Remove the jammed paper.
4. If the paper is jammed in the cutter unit, use the tweezers
included in the accessories to remove it.
Using the "
3
" and "
4
" keys to remove jammed paper.
1
If the jammed paper cannot be removed by the procedure described in "1"
2
Front safety cover
Rear safety cover