- 19 -
5. Registering cutting dimensions
Overview
Pre-register cutting dimensions, and call them up as
required by selecting registration numbers.
Numbers 0 through 98 are available for registering
cutting dimensions.
¥
Do not register the following dimensions. They will
result in paper jams in the machine's interior.
¥
Leading edge cut (CUT No.1) 3.2mm or less.
¥
Middle cut (CUT No.2) 90mm or less.
¥
Trailing edge cut (CUT No.3) 3.2mm or less.
IMPORTANT
Procedure for registering cutting dimensions
2
1
1. Press the MODE button as many times as needed to
select "Freesize Input".
6. Use the "
3
" and "
4
" keys to select the leading edge cut
(CUT No. 1) dimension.
7. Press the SET button. The leading edge cut (CUT No. 1)
dimension selected will be set.
4. Use the "
3
" and "
4
" keys to select the number of
pieces.
5. Press the SET button. The number selected will be set. (2
through 15 can be set for the number of pieces.)
2. Use the "
3
" and "
4
" keys to set a registration number.
3. Press the SET button. The registration number will be
set.
[ F r e e s i z e
I n p u t ]
N o .
?
4 4
>
N o . 0 0
[ F r e e s i z e
I n p u t ]
N o .
?
4 4
>
N o . 0 1
P i e c e s
?
:
3
L e n g t h ?
T :
5 . 0
1 :
5 . 0 mm
Example : selecting No.1
¡
Brackets( )indicate the case with 3 pieces
Leading edge cut
(CUT No.1)dimension
Middle cut
(CUT No.2)dimension
Trailing edge cut
(CUT No.3)dimension
Example : selecting 3 pieces
Example : inputting 5mm
for CUT No.1
Total length
CUT No.
Cutting length