- 20 -
5. Registering cutting dimensions
11.
a
a
Press the SET button. The trailing edge cut (CUT No. 3)
dimension selected will be set. Registration is now
complete.
The display in step 1 will reappear on the screen.
To register more dimensions, repeat the above
procedure.
To run the machine at this point:
¥
If you set only the leading edge cut (CUT No. 1)
dimension, to a value in the range 101.5-170mm, or
only the trailing edge cut (CUT No. 3) dimension, to a
value over 210mm:
The number of cuts will be automatically increased,
for smoother processing of the cut paper. Note also
that the set number of cuts will also increase, and the
number-of-sheets-cut-count will be decreased.
IMPORTANT
8. Use the "
3
" and "
4
" keys to select the middle cut (CUT
No. 2) dimension.
9. Press the SET button. The middle cut (CUT No. 2)
dimension selected will be set.
10. Use the "
3
" and "
4
" keys to select the trailing edge cut
(CUT No. 3) dimension.
L e n g t h ?
T :
1 0 5 . 0
2 : 1 0 0 . 0 mm
L e n g t h ?
T :
1 1 0 . 0
3 :
5 . 0 mm
Press the MODE button as many times as needed to
select the SELECT mode. Then refer to "Selecting the
cutting dimensions" on p.17.
Example : inputting 100mm for CUT No.2
Example : inputting 5mm for CUT No.3
