background image

dunelm.com

Thank You

Dear Customer

Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design 
and construction of our products to ensure they set the standard for quality, durability and ease of 
assembly.

If for any reason you feel we haven’t lived up to the high standards we set ourselves, please don’t 
hesitate in contacting us on 

03451 656565

 where our team will be very keen to understand what has 

gone wrong and, more importantly, put it right.

The next step...

There is no need to feel daunted by the number of 
parts and fittings in front of you, we have compiled 
this straight forward, step-by-step guide to make 
sure that assembling your furniture is as easy as 1, 
2, 3. Before you begin, we advise that you check 
that you have everything you need to get started.

Top tip

Find a space to spread everything out across 
the floor before you begin assembling the item. 
Lay  each  panel  down  on  a  clean  and  level  area,          
ideally in the room of intended use, ensuring there 
is enough room to manoeuvre around the item.  
It is recommended that two people assemble this 
product together. The full list of furniture parts,    
fixtures and fittings, as well as the tools you will 
need for assembly can be found on in this manual.

Top tip

Identify all the fittings, make sure that you have 
them all prepared and familiarise yourself with 
each component to make things easier when you 
are putting it all together.

Safety and care advice
IMPORTANT

 - The first step you need to 

take is to ensure your safety! Please take the 
time to read and understand these instructions  
before assembling your furniture.

Please keep these instructions for future reference.

Keep  children  and  animals  away  from  the         
assembly area. This furniture contains small 
parts that could cause choking if swallowed.

Keep all plastic wrapping materials away 
from babies and children to avoid danger of
suffocation.

Ensure that all packaging is disposed of carefully 
and responsibly.

From time to time check that there are no loose      
fittings on the unit, re-tighten when necessary. 
Two people may be required for the assem-
bly  of this product.

Once items are part or fully assembled they are 
not returnable unless faulty. This item is not for 
outdoor use – unless stated otherwise.

Some items will be supplied with a wall 

 

fixing strap which we recommend is used to  
secure the item to the wall to prevent a child from 
accidentally pulling furniture over. Furniture can 
be dangerous if incorrectly installed. Assembly 
should be carried out by a competent person. 
No liability will be accepted for damage or  
injury caused by incorrectly installed or assem-
bled furniture.

Содержание Churchgate Top Unit Glass Door























Отзывы: