dunelm.com
Section 2: Connecting Multiple Top Units
Please note: The top units shown in the following steps are generic/universal examples and your
items may differ in design. The assembly process remains the same, regardless of which base unit
you are assembling.
Step 2.1:
When connecting multiple top units together. The first step is to drill the side connecting positions at one
time. Take a 10 mm wood drill bit (
M
) and a cordless drill (
J
) carefully drill the location hole on the inside
panel of the on the sides that will be connected together. Please note in order to avoid break through
when drilling the side panel. Clamp or hold a piece of wood to the outside surface of the cabinet over the
drill point.
WARNING:
ONLY DRILL HOLES IN THE
SIDE PANELS THAT WILL BE
JOINED TO ANOTHER TOP
UNIT.
WALL
M x1
J x1
M
J
