Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisurecraft.com
Stand the 2 sides of the heater guard on edge
with pre-drilled holes on the bottom.
Screw front guard support to either side using
(2) – 2 ½” screws per side.
Place heater guard around electric heater.
*Make sure heater guard is level before securing.
Screw guard to wall using 2 ½” screws
Using a 4” Drill bit, drill a hole on wall under
heater approximately 5” from floor.
Now simply place the vent in the hole from the
outside.
Assemble remaining front support to the 2 ends
in the same manner as previous step.
Dundalk LeisureCraft
Electric Heater Installation
Instructions
