Place a washer and nut over threaded rod
as shown in picture.
Use a 7/16” wrench to tighten up nut.
Do not overtighten
Repeat on other side.
Repeat for Back Gable.
Grab the 2 fascia pieces.
They will be 2 pcs assembled together the same
length as the roof boards but have the side trim
attached.
Place the fascia on top of the wall like
shown.
Use a rubber mallet to “knock” the grooves
of the fascia board into place.
Place 2 ½” screws in the pre drilled holes to
assist in installation.
Dundalk LeisureCraft Outdoor Cedar Cabin Sauna
Assembly Instructions
