As some strips come in two pieces, they are
numbered to ease in the installation of
them.
Find the shingle stripped marked “Bottom”.
Fasten the shingle strips down to the roof
using 1 ½” screws.
Secure with screws approximately every
16”.
*Fasten screws within 1 ½” from the top of shingle
strip to ensure they will be covered by the shingle
overlap.
Lay the “bottom” strip of shingles on the
roof as shown.
The bottom of the shingle strip should be
flush with the edge of fascia stave and it
should overhang the trim by ½”.
Dundalk LeisureCraft Outdoor Cedar Cabin Sauna
Assembly Instructions
